Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″


Pentair Industries DGD-7525 - This pentek dgd-7525 spun polypropylene filter cartridge reduces sand, and rust particles in residential, commercial, scale, silt, and municipal drinking water. The nominal filtration rating of the pre-filter layer is 75 microns, and the rating of the post-filter layer is 25 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria.

It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" - 4 to 62. 8 degrees C. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water. Specificationsnominal filtration rating pre-filter75 micronsNominal filtration rating post-filter25 micronsInitial pressure drop at 10 gpm.

More information about Pentair Industries DGD-7525

Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"


Pentair Industries DGD-2501 - It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This pentek dgd-2501 spun polypropylene filter cartridge reduces sand, silt, and rust particles in residential, scale, commercial, and municipal drinking water.

It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron.

Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" - This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, commercial, and is used for treatment of residential, and municipal drinking water. Specificationsnominal filtration rating pre-filter25 micronsNominal filtration rating post-filter1 micronInitial pressure drop at 10 gpm.

More information about Pentair Industries DGD-2501


Similar products



Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"


Pentair Industries DGD 5005 - The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges.

This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water. Specificationsnominal filtration rating pre-filter50 micronsNominal filtration rating post-filter5 micronsInitial pressure drop at 10 gpm.

Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" - It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. This pentek dgd-5005 spun polypropylene filter cartridge reduces sand, and rust particles in residential, commercial, silt, scale, and municipal drinking water.

More information about Pentair Industries DGD 5005


Similar products



Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings


Pentair Industries TIER1-OR-100 - Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

Material: Buna-N. Reduces sand, silt, scale, commercial, and rust particles in residential, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber Buna-N for flexibility and resistance to abrasion and tearing.

Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings - Spun polypropylene for resistance to chemicals and bacteria. The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

This o-ring fits pentek big blue filter housings, such as drinking water purification, swimming pools, and industrial processes, which are used in various applications, among others. Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes.

Type: O-Ring.

More information about Pentair Industries TIER1-OR-100


Similar products



Pentek 150296 SW-3 Wrench for #10 Big Blue Housings


Pentair Industries SW-3 - Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Reduces sand, commercial, and rust particles in residential, silt, scale, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. It is made of strong plastic. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

Type: O-Ring. This wrench fits the sumps of pentek #10 big Blue filter housings, and industrial processes, which are used in a wide variety of applications, irrigation, including drinking water purification, among others. Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes.

Pentek 150296 SW-3 Wrench for #10 Big Blue Housings - Material: Buna-N. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Made of strong plastic. Fits pentek #10 Big Blue housing sumps. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Initial pressure drop of less than 1 psi at a flow rate of 10 gpm.

More information about Pentair Industries SW-3


Similar products



Pentek GAC-BB Drinking Water Filter 9-3/4" x 4-1/2"


Pentair Industries GAC-BB - The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Type: O-Ring. Wrench for loosening filter housing sumps. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. This filter cartridge has an initial pressure drop of 6 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4.

Pentek GAC-BB Drinking Water Filter 9-3/4" x 4-1/2" - 4 to 51. 7 degrees C. Filter cartridge for reduction of chlorine taste and odor and other unwanted tastes and odors. Made of strong plastic. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Reduces sand, commercial, and rust particles in residential, scale, silt, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity.

More information about Pentair Industries GAC-BB


Similar products



Pentek WP.5BB97P String-Wound Polypropylene Filter Cartridge, 10" x 4.5", 0.5 Micron


Pentair Industries WP.5BB97P - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Material: Buna-N. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

For use with: pentek, pentair Water - Big Blue Housings Only. Fits pentek #10 Big Blue housing sumps. Reduces sand, scale, silt, and rust particles in residential and municipal drinking water and industrial fluid applications. Nominal filtration rating of 05 micron. Wrench for loosening filter housing sumps.

Pentek WP.5BB97P String-Wound Polypropylene Filter Cartridge, 10" x 4.5", 0.5 Micron - For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Spun polypropylene for resistance to chemicals and bacteria. Built-in 20-micron post filter for reduction of carbon fines and other suspended particles.

Initial pressure drop of 6 psi at 2 gpm. Water filters are used in a wide range of applications, and irrigation, industrial processes, swimming pools, including drinking water purification, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems.

More information about Pentair Industries WP.5BB97P


Similar products



Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter


Pentek CFB-Plus10BB - Reduces sand, silt, commercial, scale, and rust particles in residential, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. It offers the same benefits with even greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge.

Wrench for loosening filter housing sumps. Material: Buna-N. Built-in 20-micron post filter for reduction of carbon fines and other suspended particles. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Cfb-plus series products are modified molded blocks manufactured using our proprietary fibredyne technology.

Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter - Temperature range of 40 to 165 degrees F 4. 4 to 74 degrees C. For use with: pentek, pentair Water - Big Blue Housings Only. Filter cartridge for reduction of chlorine taste and odor and other unwanted tastes and odors. Spun polypropylene for resistance to chemicals and bacteria. Initial pressure drop of 5 psi at a flow rate of 10 gpm.

Temperature range of 40 to 145 degrees F 4. 4 to 62.

More information about Pentek CFB-Plus10BB


Similar products



Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron


Pentair Industries C1 - Built-in 20-micron post filter for reduction of carbon fines and other suspended particles. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Spun polypropylene for resistance to chemicals and bacteria.

This pentek c1 carbon filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 75%. H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron - Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes. Initial pressure drop of 5 psi at a flow rate of 10 gpm. The cartridge has an initial pressure drop of 4 pounds per square inch psi at a flow rate of 5 gpm, and it operates over a temperature range of 40 to 125 degrees F 4.

4 to 51. 7 degrees C. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Type: O-Ring.

More information about Pentair Industries C1


Similar products



Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns


Pentair Industries EP-BB - Water filters are used in a wide range of applications, swimming pools, industrial processes, including drinking water purification, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. Nominal filtration rating of 5 microns. For use with: pentek, pentair Water - Big Blue Housings Only.

Temperature range of 40 to 165 degrees F 4. 4 to 74 degrees C. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%.

Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns - H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes.

This pentek epm-bb carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Initial pressure drop of 6 psi at 2 gpm. Temperature range of 40 to 125 degrees F 4. 4 to 51.

More information about Pentair Industries EP-BB


Similar products



Pentek R50-BB Pleated Polyester Filter Cartridge, 9-3/4" x 4-1/2", 50 Microns


Pentair Industries R50-BB - It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength.

This pentek r50-bb pleated polyester filter cartridge reduces sand, silt, rust, dirt, and scale particles in residential and commercial water. It has a nominal filtration rating of 50 microns at an efficiency of 85%. This pleated polyester filter cartridge meets national sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and industrial processes, and is for use in various applications, including drinking water purification, irrigation, among others.

Pentek R50-BB Pleated Polyester Filter Cartridge, 9-3/4" x 4-1/2", 50 Microns - Specificationsnominal filtration rating50 micronsInitial pressure drop at 10 gpm.

More information about Pentair Industries R50-BB


Similar products

XobMaer is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Top